fbpx

The Challenge of Airport Perimeter Security Highlighted By Christmas Day Breaches

Protecting the perimeter of airports remains a difficult task across the US. On December 25th 2013, perimeter fence breaches occurred at two separate airports, Newark, New Jersey, and Phoenix, Arizona. In 2013, IHS estimated electronic perimeter security at airports in the US to be worth about $25 million for the hardware and software alone, or about 9% of the perimeter security market in the US.

The breach at Newark went unnoticed for 24 hours, when security footage was reviewed and revealed the trespass. At the time of the incident, Newark reportedly had CCTV and motion sensors in place which alarmed; however, there was a significant delay in response. At the Phoenix Sky Harbor airport, no electronic perimeter security systems are in place, with the airport operator, instead relying on layered physical barriers, cameras and airport employees.

As of 2013, no update has been made for any guidelines surrounding the requirement for perimeter security at airports. Most of the requirements are for physical fencing, not electronic security. Additionally, the Transportation Security Administration (TSA) isn’t directly responsible for all security functions within an airport, and perimeter security is one of those areas.  Perimeter security is primarily the responsibility of airport operators; however, the airport operators must adhere to certain security plans that meet Federal standards. The budget for perimeter security falls with the airport operator and is not funded by the TSA. Two examples of regulations that must be abided by include 49 CFR Part 1542 and 14 CFR 139.

Overall, IHS expects that airports will continue to invest in perimeter security and the investment will be for technologies such as fence sensors, radars and video analytics – all sensor types which will not be impacted by the noise and vibrations of aircraft. Since many airports have a limited budget, they must work to win grants in order to procure such a solution. Manufacturers should continue to work with airport operators in order to provide the most cost effective solution and evidence of a solution’s reliability and proven probability of detection in real-life cases studies.

Blake Kozak
Senior Analyst
Access Control, Fire and Security
Phone: 512-582-2023
[email protected]

IHS Technology
15 Inverness Way East
Englewood, CO 80112
www.ihs.com
www.imsresearch.com

Here you’ll find a wealth of practical technical insights and expert advice to help you bring AI and visual intelligence into your products without flying blind.

Contact

Address

1646 N. California Blvd.,
Suite 360
Walnut Creek, CA 94596 USA

Phone
Phone: +1 (925) 954-1411
Scroll to Top